snathan
02-23 08:13 PM
Hi,
Im from India and joined the company 4 years back as Programmer/Analyst. I have an Bachelors in Computer Science (3 Yrs) + MCA (3 Yrs) and experience of 4 years & 8 months before joining the company. The company field for GC under EB3, priority date: November 2008 and I-140 approved date: November 2009.
With nearing 9 years of experience company promoted me to Sr. Programmer/Analyst consultant and is ready to file the case in EB2.
My question:
1. My priority date from EB3 is November 6, 2008. So after approval of fresh labor for EB2, can the new I-140 for EB2 be filed with the old priority date of EB3 ?
2. Can the same company hold two I-140 for the same employee? That is keep the EB3 I-140 active and apply for EB2 I-140 till the EB2 clears/approves ?
3. The designation & job duties can be the same as that of EB3 or need to be changed.
Thanks in advance!
1. You cannot use the experience gained from the current employer...
2. You need to have MS+2 or Bachlor+5 years progressive experience before joining your current employer. You are short of 4 months for 5 years progressive experience and definitely USCIS will not appcept.
3. Also you will have tough time, if you PERM requires bachlor and you do not have four years single source degree. So its importent what the requirement on the PERM is.
So I am seeing you are going to have tough time to get EB2. But you will get the PERM approved and will face issues during I-140.
Im from India and joined the company 4 years back as Programmer/Analyst. I have an Bachelors in Computer Science (3 Yrs) + MCA (3 Yrs) and experience of 4 years & 8 months before joining the company. The company field for GC under EB3, priority date: November 2008 and I-140 approved date: November 2009.
With nearing 9 years of experience company promoted me to Sr. Programmer/Analyst consultant and is ready to file the case in EB2.
My question:
1. My priority date from EB3 is November 6, 2008. So after approval of fresh labor for EB2, can the new I-140 for EB2 be filed with the old priority date of EB3 ?
2. Can the same company hold two I-140 for the same employee? That is keep the EB3 I-140 active and apply for EB2 I-140 till the EB2 clears/approves ?
3. The designation & job duties can be the same as that of EB3 or need to be changed.
Thanks in advance!
1. You cannot use the experience gained from the current employer...
2. You need to have MS+2 or Bachlor+5 years progressive experience before joining your current employer. You are short of 4 months for 5 years progressive experience and definitely USCIS will not appcept.
3. Also you will have tough time, if you PERM requires bachlor and you do not have four years single source degree. So its importent what the requirement on the PERM is.
So I am seeing you are going to have tough time to get EB2. But you will get the PERM approved and will face issues during I-140.
shirish
10-04 11:24 AM
Received RN for EAD and AP for all three of us. (NO EAD for son :) as did not apply) yesterday
PD - sept 05 EB2 India-
I140 - Approved Apr 2006
I-485,AP,EAD - reached NSC on July 27th 07
485- RN - Not received
EAD - RN - received - ND - sept 27th 07 - EAC XXXXXXX
AP - RN - received - ND - sept 27th 07 - EAC XXXXXXX
Hope every will get it soon.
PD - sept 05 EB2 India-
I140 - Approved Apr 2006
I-485,AP,EAD - reached NSC on July 27th 07
485- RN - Not received
EAD - RN - received - ND - sept 27th 07 - EAC XXXXXXX
AP - RN - received - ND - sept 27th 07 - EAC XXXXXXX
Hope every will get it soon.
naushit
05-22 04:02 PM
My attorney just said...she has too many application to file...she just cant do it on 1st June, she will try to do 1st week of June....but I am sure she is gonna miss 10th June too :).... happy?
validIV
03-18 12:33 PM
You have an EAD, so you can file the incorporation or founding of the company yourself. You do not need a partner. As for formation and dissolution fees for the business entity of your choice, you would need to research that by your state.
more...
fromnaija
11-17 11:51 AM
Hmmm...
In my view I would say that it has more chances to go through between Jan 2007 and August 2007. After that, it is poticial campaign all over again.
That is just my humble opinion.
Regards,
Tito
You are right! I also do not think anything will get passed until 2007. SKILL or CIR will only get passed in the January to August 2007 timeframe. By 2008, focus will be on the Presidential election.
In my view I would say that it has more chances to go through between Jan 2007 and August 2007. After that, it is poticial campaign all over again.
That is just my humble opinion.
Regards,
Tito
You are right! I also do not think anything will get passed until 2007. SKILL or CIR will only get passed in the January to August 2007 timeframe. By 2008, focus will be on the Presidential election.
cheg
07-26 01:49 AM
I think you should read this thread to help you understand what EAD does for you and your spouse.
http://immigrationvoice.org/forum/sh...ad.php?t=10817
Now for your second question, if you're I-140 gets rejected then your I-485 will be rejected too. The approved EAD will be discontinued if you switched from H1 to EAD and you will no longer be legal in the US. If you think you're I-485 is not a strong case it's bettter to stay on H1 and not use EAD even if they issue you one. Good luck! Hope I was able to answer your question. :)
http://immigrationvoice.org/forum/sh...ad.php?t=10817
Now for your second question, if you're I-140 gets rejected then your I-485 will be rejected too. The approved EAD will be discontinued if you switched from H1 to EAD and you will no longer be legal in the US. If you think you're I-485 is not a strong case it's bettter to stay on H1 and not use EAD even if they issue you one. Good luck! Hope I was able to answer your question. :)
more...
shankar_thanu
08-05 12:47 PM
RD: July 2nd
PD: Oct 2005
ND: Aug 24 2008
EB2 I
Someone in another thread posted saying TSC IO said they are processing by ND...
PD: Oct 2005
ND: Aug 24 2008
EB2 I
Someone in another thread posted saying TSC IO said they are processing by ND...
srkamath
07-21 11:23 AM
FYI:
I don't know if this is old news but thought of sharing it anyway.
I was in the same boat as many others here i.e, no FP notice even 1yr after filing for 485. With my PD becoming current in Aug 2008, I called my attorney to see if he can do anything to help me out. He told me that due to several complaints from people like us and a law suit threat (or an actual lawsuit, not sure) from AILA, the Texas center has sent has set up an exclusive fax line for such requests. This system came into existence only about 2-3 weeks ago.
He sent a fax on my behalf to that number last Tuesday 7/15/08. My wife and I both received FP notices on Sat 7/19/08! So looks like for a change, something that�s set up for our own good is actually working. Frankly, I hadn�t pinned any hopes on the fax having a positive impact but I was pleasantly surprised. Our appointments are for next week.
Hope this little tip will help others in the same boat if their attorneys are either not aware and/or haven�t told their clients about it.
The fax number is not made available to the general public. Only attorneys have access to it.
BTW: As a result of all this, I haven't seen any LUD changes (soft or hard) on my case status online....I thought that was strange.
What is the fax number?
I don't know if this is old news but thought of sharing it anyway.
I was in the same boat as many others here i.e, no FP notice even 1yr after filing for 485. With my PD becoming current in Aug 2008, I called my attorney to see if he can do anything to help me out. He told me that due to several complaints from people like us and a law suit threat (or an actual lawsuit, not sure) from AILA, the Texas center has sent has set up an exclusive fax line for such requests. This system came into existence only about 2-3 weeks ago.
He sent a fax on my behalf to that number last Tuesday 7/15/08. My wife and I both received FP notices on Sat 7/19/08! So looks like for a change, something that�s set up for our own good is actually working. Frankly, I hadn�t pinned any hopes on the fax having a positive impact but I was pleasantly surprised. Our appointments are for next week.
Hope this little tip will help others in the same boat if their attorneys are either not aware and/or haven�t told their clients about it.
The fax number is not made available to the general public. Only attorneys have access to it.
BTW: As a result of all this, I haven't seen any LUD changes (soft or hard) on my case status online....I thought that was strange.
What is the fax number?
more...
kak1978
06-05 10:50 PM
I saw the same status message yesterday. But it was delivered today morning at 5:40 am!, Weird!!
I dont know if other Folks have seen the same thing. My renewal EAD application has reached Texas (TSC) today June 5th around noon by USPS Express Mail but the status says
Status: Notice Left
We attempted to deliver your item at 11:16 AM on June 5, 2008 in MESQUITE, TX 75185 and a notice was left. A second delivery attempt will be made. If unsuccessful, we will hold it for five business days and then it will be returned to the sender. Information, if available, is updated every evening. Please check again later.
The address where i sent is
USCIS
Texas Service Center
P.O. Box 851041
Mesquite, TX 75185-1041
Any clue what may be going on - this is another round of fun :confused:
I dont know if other Folks have seen the same thing. My renewal EAD application has reached Texas (TSC) today June 5th around noon by USPS Express Mail but the status says
Status: Notice Left
We attempted to deliver your item at 11:16 AM on June 5, 2008 in MESQUITE, TX 75185 and a notice was left. A second delivery attempt will be made. If unsuccessful, we will hold it for five business days and then it will be returned to the sender. Information, if available, is updated every evening. Please check again later.
The address where i sent is
USCIS
Texas Service Center
P.O. Box 851041
Mesquite, TX 75185-1041
Any clue what may be going on - this is another round of fun :confused:
21stIcon
05-04 01:07 PM
I've been monitoring BEC&PERM for the past 30 days and delved deeper on all labor processing thread, but found none on denials of conversion, please point out some reference URLs for PERM conversion denials that would be helpful.
more...
sam_hoosier
05-22 11:23 AM
plss do not rush with ur filing in june....pls file after june 10th so that cut off dates move foward in july VB.
;)
People will be filing their I-485, not their EAD. EAD is something one gets after the 1-485 application has been pending for 6 months :)
;)
People will be filing their I-485, not their EAD. EAD is something one gets after the 1-485 application has been pending for 6 months :)
cooler
07-28 01:00 PM
This might be a cliche..
Neither GC nor the Career meet our ultimate end goals
If you boil it all down, this craziness is driven by three things
1) Hunger for money
2) Hunger for Achievement/Recognition
3) Hunger for materialistic pleasures.
When you are 65+ years old, I bet none of us would be thinking about GC, Citizenship or for that matter how good the infrastructure in this country is. However I bet we will all be thinking about two things
1) Financial Freedom/Retirement
2) A closer and more fulfilling relationship with near & dear ones.
From what I can remember, I have always wanted to come to the US, enjoy the luxuries of life and escape India. 12 years into this country, none of that joy or excitement remains. What has taken over is planning for an early retirement and peace of mind. To put things in perspective, I am neither approaching retirement nor approaching mid life crisis (I think), I am just 35 years old.
My goal now is to make my money without sacrificing too much in life, plan out my future and make my way to the beeline. Hopefully the conversion rates wont disappoint us, and I can disappear into the Indian sunset.
Again, ramblings from a tortured soul.
Cooler
Neither GC nor the Career meet our ultimate end goals
If you boil it all down, this craziness is driven by three things
1) Hunger for money
2) Hunger for Achievement/Recognition
3) Hunger for materialistic pleasures.
When you are 65+ years old, I bet none of us would be thinking about GC, Citizenship or for that matter how good the infrastructure in this country is. However I bet we will all be thinking about two things
1) Financial Freedom/Retirement
2) A closer and more fulfilling relationship with near & dear ones.
From what I can remember, I have always wanted to come to the US, enjoy the luxuries of life and escape India. 12 years into this country, none of that joy or excitement remains. What has taken over is planning for an early retirement and peace of mind. To put things in perspective, I am neither approaching retirement nor approaching mid life crisis (I think), I am just 35 years old.
My goal now is to make my money without sacrificing too much in life, plan out my future and make my way to the beeline. Hopefully the conversion rates wont disappoint us, and I can disappear into the Indian sunset.
Again, ramblings from a tortured soul.
Cooler
more...
Sirisian
05-12 12:08 AM
SDL is rarely used by itself. Just use it for windowing and let OpenGL render (it's much faster). Also you'll notice that SDL can't rotate an image (or it couldn't 2 years ago). There are free OpenGL GUI's like CEGUI if you need one. I'd learn how to get the basic stuff.
Make sure you know the STL completely. This means, std::vector, std::list, and std::map kind of stuff. I'd recommend learning the OOP paradigm since it helps a lot.
http://gpwiki.org/index.php/C_plus_plus:Modern_C_plus_plus:Vectors
Learn how to set up object class with an x and y pos and then create a manager class that allows you to insert them into a list or vector container. Then add maybe a velocity into the object class and see if you can iterate the group of points and move them with their velocities. (by the way I'm describing a particle engine.
Other things to make sure is to use std::string and not char so much.
Templates are good to learn later once you find what they are used for.
Make sure you know the STL completely. This means, std::vector, std::list, and std::map kind of stuff. I'd recommend learning the OOP paradigm since it helps a lot.
http://gpwiki.org/index.php/C_plus_plus:Modern_C_plus_plus:Vectors
Learn how to set up object class with an x and y pos and then create a manager class that allows you to insert them into a list or vector container. Then add maybe a velocity into the object class and see if you can iterate the group of points and move them with their velocities. (by the way I'm describing a particle engine.
Other things to make sure is to use std::string and not char so much.
Templates are good to learn later once you find what they are used for.
kumar1
06-14 03:03 PM
God bless Raj. I am not sure if every story ends like this particular one.
Refer this:
Case Study: Upgrade from EB3 to EB2 (http://www.imminfo.com/News/Newsletter/2010-06/case_study_upgrade_from_eb3_to_eb2.html)
Refer this:
Case Study: Upgrade from EB3 to EB2 (http://www.imminfo.com/News/Newsletter/2010-06/case_study_upgrade_from_eb3_to_eb2.html)
more...
lord_labaku
07-06 05:21 PM
longer guns, rifles have less strict carry requirement as they cannot be concealed. Usually handguns need a carry permit to be carried around concealed.
A citizen should follow the constitution & the 2nd amendment is part of the constitution. Just get educated on safety techniques 1st. NRA website has good info. Local gun ranges will allow safe renting too without needing to own one if you just want to use guns as hobby (which is what I do).
Ruger or Browning .22LR guns are good to start. ( I am sure other brands are probably good as well...)
A citizen should follow the constitution & the 2nd amendment is part of the constitution. Just get educated on safety techniques 1st. NRA website has good info. Local gun ranges will allow safe renting too without needing to own one if you just want to use guns as hobby (which is what I do).
Ruger or Browning .22LR guns are good to start. ( I am sure other brands are probably good as well...)
suratvoice
12-17 11:59 AM
What does career progression mean ?
Moving from Senior Programmer Analyst > program manager.
This is a very gray area.
Thats the problem, I read a quote somewhere that the Ac-21 is designed to be vague so that there is a lot of leeway - if it was specific then it would be too limiting.
but since there is hardly any precedent, new people are worried. now this is also on an off chance that there will be an RFE, based on what i read, there might not even be an RFE. i see that you have PMP, so do I, maybe thats one of the reasons i got this job...
so the question remains... is career progression
from
programmer/ software engineer/ software developer/ programmer analyst
to
project manager/ program manager/ product manager
possible?
We know that it is logical that as a person gets senior, more responsibilities are put on. some prefer to stay on the hard core technical side but some prefer not to.. nothing wrong with either approaches.
experts/attorneys/experienced people.. your opinion??
Moving from Senior Programmer Analyst > program manager.
This is a very gray area.
Thats the problem, I read a quote somewhere that the Ac-21 is designed to be vague so that there is a lot of leeway - if it was specific then it would be too limiting.
but since there is hardly any precedent, new people are worried. now this is also on an off chance that there will be an RFE, based on what i read, there might not even be an RFE. i see that you have PMP, so do I, maybe thats one of the reasons i got this job...
so the question remains... is career progression
from
programmer/ software engineer/ software developer/ programmer analyst
to
project manager/ program manager/ product manager
possible?
We know that it is logical that as a person gets senior, more responsibilities are put on. some prefer to stay on the hard core technical side but some prefer not to.. nothing wrong with either approaches.
experts/attorneys/experienced people.. your opinion??
more...
pappu
04-27 09:38 AM
This looks like a hoax to me. Could you quote a credible news story or a link on a enforcement site where there is any advisory?
pointlesswait
02-13 06:55 PM
vote por favor, for IV ;-)
aachoo
02-20 06:54 PM
How about the opposite problem. The LC wages are lower that what I am being paid. the LC reflects what I was being paid at the time it was filed. not sure if the lawyer screwed up. Right now, I am doing a similar job (non-IT, non-technical), but with wider responsibility and earning ~ 40% more. What now??
-a
-a
immigrationvoice1
03-20 12:26 PM
Thanks walking_dude in explaining it so well. So, there will be major changes other than the Prez elections this year and next. Lets remain hopeful...:)
There are 35 Senate seats up for election in November along with the post of President. That is 35% of 100 seat Senate. It will be a different Senate as Dems are projected to win many of these seats and Repubs are projected to lose them. As things stand, now GOP [Republicans] are strategizing how to prevent Democrats from getting filibuster-proof 60 seat majority in the Senate. Even if they (dems) don't get 60 seats [ lets say they are 2-3 seats short] they can easily provide incentives for 2-3 Republican Senators to cross-over and vote with them [ much easier than getting 9-10 like now!]. That way, it will be a different Senate.
http://www.electoral-vote.com/evp2008/Senate/senate_races.html
And the whole of House of Representatives [ which has 2 years term] is up for election too [ last election was in 2006]. It's true that all media attention is focussed on Presidential election. But there are also going to be major changes in the House as well as the Senate.
I agree with you on one point. Definitely Lobbying will be needed to be done after the elections. Its the only way to attach IVs provisions to some other bill and getting it passed. There's no other way to get them passed.
There are 35 Senate seats up for election in November along with the post of President. That is 35% of 100 seat Senate. It will be a different Senate as Dems are projected to win many of these seats and Repubs are projected to lose them. As things stand, now GOP [Republicans] are strategizing how to prevent Democrats from getting filibuster-proof 60 seat majority in the Senate. Even if they (dems) don't get 60 seats [ lets say they are 2-3 seats short] they can easily provide incentives for 2-3 Republican Senators to cross-over and vote with them [ much easier than getting 9-10 like now!]. That way, it will be a different Senate.
http://www.electoral-vote.com/evp2008/Senate/senate_races.html
And the whole of House of Representatives [ which has 2 years term] is up for election too [ last election was in 2006]. It's true that all media attention is focussed on Presidential election. But there are also going to be major changes in the House as well as the Senate.
I agree with you on one point. Definitely Lobbying will be needed to be done after the elections. Its the only way to attach IVs provisions to some other bill and getting it passed. There's no other way to get them passed.
smidreb
08-04 01:10 PM
We need much more info to help out.
1. What is immigration status currently? She can file for a I-485 if her labor has been approved. If she is on H4, then there is nothing she can do.
..............?[/QUOTE]
--She is on H4
2. Is she a dependent on her husbands I-485? If so, then she dosen't need to file 1-485 again, she can get her EAD.
..............?[/QUOTE]
--He had filed his 485 before she got married to him.
1. What is immigration status currently? She can file for a I-485 if her labor has been approved. If she is on H4, then there is nothing she can do.
..............?[/QUOTE]
--She is on H4
2. Is she a dependent on her husbands I-485? If so, then she dosen't need to file 1-485 again, she can get her EAD.
..............?[/QUOTE]
--He had filed his 485 before she got married to him.
No comments:
Post a Comment