RGunner
Dec 15, 03:29 PM
Have 2 video cards to choose from and an ATA controller if needed?
ATI Mac Edition 7000 PCI - $40
ATI Mac Edition 9200 PCI - $80
ACARD ATA133 6280M Boxed PCI - $50
Both mint and tested (receipt for warranty available as well I believe but would have to dig through files).
ATI Mac Edition 7000 PCI - $40
ATI Mac Edition 9200 PCI - $80
ACARD ATA133 6280M Boxed PCI - $50
Both mint and tested (receipt for warranty available as well I believe but would have to dig through files).
MacFan25
Jun 24, 06:42 PM
I'm glad to hear that you are liking your iBook. You will probably get used to the keyboard soon. :)
dalvin200
Jan 15, 08:16 AM
you started a new thread for this?
its on the macrumors homepage! wtf.. .!?
where's the spam filter at? ;)
its on the macrumors homepage! wtf.. .!?
where's the spam filter at? ;)
arn
Oct 31, 03:02 AM
recs by date added is now available.
Note... recs weren't timestamped until recently... so your first batch of recs, if dont before I started timestamping them may not be in any particular order.
arn
Note... recs weren't timestamped until recently... so your first batch of recs, if dont before I started timestamping them may not be in any particular order.
arn
more...
anti-microsoft
Mar 9, 10:06 AM
Ok, I know it's just a wee niggle and I knew that there would be some bashing but it's fairly annoying to see 10-15 posts that are clearly attention-seeking. I'm just saying it's a bit immature to write a post with a title that has so many question marks. Also, the type of thread that has a title like that is likely to be short, pointless and uninformative. I know I'm stereotyping here, but what I'm trying to say is: the thread title normally is just a drop of water that, when you open the thread, turns into a flood.
Ams.
Ams.
polaris1
Apr 6, 11:20 AM
id much rather get a free one than pay for it, dont worry i'm not doing anything illegal so stop being nasty.
more...
Blue Velvet
Apr 8, 12:55 PM
covertsurfer, here's a large transparent PNG. Enjoy your weekend. :)
Arial Bold, shudder.
Arial Bold, shudder.
dobbin
Oct 17, 04:32 AM
This is indeed a well known issue with cubes. Some people were affected immediately, and others only after a period of time like you.
My cube has a 'seizure' about once every 4 months and it will do this for an hour or two and then correct itself and be fine again.
There have been numerous causes and solutions suggested and it appears that different things work for different machines.
The usual cause is the proximity switch - the touch sensitive one on top of the cube. Most people report that the switching on and off is caused by a badly fitting or loose gasket around this switch inside the cube.
Some people say that making sure this gasket is seated firmly will cure the problem, and others have had this replaced (for free) by Apple.
I have never found this to be the case with mine, it just seems to have a mind of its own, for short spells every now and again.
Some people have also reported that this happens on hot days or when the air-con is swithed off. I've not noticed this (as I live in the UK it never gets hot!).
There have been hundreds of discussions on this topic since the cube was introduced and you can probably find some useful info on the web.
I'm not sure why Apple have not provided more help on this topic given what a widespread issue it was/is, but I just searched Google for "Apple Cube Switch problem" and it came back with a lot of links. Bear in mind that the solution for one cube may not help yours! I guess this is the price we have to pay for having the coolest computer the world has ever seen :D
Cheers,
Dobbin
My cube has a 'seizure' about once every 4 months and it will do this for an hour or two and then correct itself and be fine again.
There have been numerous causes and solutions suggested and it appears that different things work for different machines.
The usual cause is the proximity switch - the touch sensitive one on top of the cube. Most people report that the switching on and off is caused by a badly fitting or loose gasket around this switch inside the cube.
Some people say that making sure this gasket is seated firmly will cure the problem, and others have had this replaced (for free) by Apple.
I have never found this to be the case with mine, it just seems to have a mind of its own, for short spells every now and again.
Some people have also reported that this happens on hot days or when the air-con is swithed off. I've not noticed this (as I live in the UK it never gets hot!).
There have been hundreds of discussions on this topic since the cube was introduced and you can probably find some useful info on the web.
I'm not sure why Apple have not provided more help on this topic given what a widespread issue it was/is, but I just searched Google for "Apple Cube Switch problem" and it came back with a lot of links. Bear in mind that the solution for one cube may not help yours! I guess this is the price we have to pay for having the coolest computer the world has ever seen :D
Cheers,
Dobbin
more...
flopticalcube
Apr 18, 02:37 PM
My zs3 is up in 2 secs and focused 1 sec later. I used to go around with a tz-1! You had to physically remove the lens cap before shooting but I still thought it was great.
trip1ex
May 5, 10:48 PM
Hassle, but you're covered.
more...
SchneiderMan
Sep 14, 07:15 PM
Thanks for the answers......But should I pull that lump off its back with a needle nose pliers? eww:eek:
Hammer it.
Hammer it.
DivineEvil
May 2, 02:24 PM
I use one of those cheap ones for more than an year! I'm very satisfied. Although I had to modify it a little bit it costed me about 10$.
more...
barkomatic
Apr 6, 09:53 AM
Are "some people" your parents? It's relatively easy to fake a broken computer without actually harming it if you think about it -- but your request sounds sketchy to me.
The new i5 13 inch MBP performs better at some games and worse at others when comparing them to the previous generation. It's a compromise Apple had to make with this generation in order to get the Sandy Bridge processors. If gaming is important to you and money is tight I'd go for a PC with discrete graphics.
The new i5 13 inch MBP performs better at some games and worse at others when comparing them to the previous generation. It's a compromise Apple had to make with this generation in order to get the Sandy Bridge processors. If gaming is important to you and money is tight I'd go for a PC with discrete graphics.
Nuck81
Dec 29, 08:23 PM
To the uninformed consumer, which is the majority of big chain business, bundles represent the best value.
But there should be an option to buy system only...
But there should be an option to buy system only...
more...
Applejuiced
May 2, 10:39 PM
Wait.
cantthinkofone
Mar 16, 09:01 PM
Infraction<Misdemeanor<Felony
more...
bousozoku
Mar 3, 09:05 PM
They were first with the most applications on Mac OS X and they've done more for optimisations on it?
Considering that their applications still don't work well, I have my doubts.
Still, we need them and Macromedia was forced to stop offering xRes when it just didn't sell as a competitor to Photoshop. Pity Live Picture.
Yes, Adobe has a good strategy but they're not as great as they would have everyone believe. We know that and they know that.
Considering that their applications still don't work well, I have my doubts.
Still, we need them and Macromedia was forced to stop offering xRes when it just didn't sell as a competitor to Photoshop. Pity Live Picture.
Yes, Adobe has a good strategy but they're not as great as they would have everyone believe. We know that and they know that.
gwuMACaddict
Sep 7, 11:30 AM
losing respect for someone because they unretire? why? thats silly in my opinion.
at least he's being honest about why he's thinking about it :eek: :D
at least he's being honest about why he's thinking about it :eek: :D
macEfan
Dec 10, 01:40 PM
yes, the ethernt card, the motherboard, and the cooling fan , and power supply are going to skoker....
the floppy drive goes to mxlews
sorry, guys, I still have to figure out shipping :)
And the rest are already gone!
thanks guys for cleaning out my closet :)
the floppy drive goes to mxlews
sorry, guys, I still have to figure out shipping :)
And the rest are already gone!
thanks guys for cleaning out my closet :)
mokeiko
Apr 5, 04:15 AM
Trueprint, direct printing from your iPad to a networked printer. I used Printopia but this required to be installed on another Mac and your Mac had to always be on in order to print.
mokeiko
mokeiko
fcortese
Mar 24, 11:31 AM
The second example is really significantly front-focused, and is shot at f/2.8, so I don't think your focus and recompose technique is to blame (I'd expect a lot less change in focus using the slight focus and recompose you've used here).
Did you lock focus on the eyes and then recompose? Is it possible that you re-focused after you recomposed?
i had a similar problem with my nikon 50mm, inconsistent focus and hunting for focus, even after i locked it. Problem was, I thought i locked it, but i didn't check the settings on the camera iteself. I was set up for continuous focus instead of single focus, which accounted for the lens hunting and refocusing everytime i tried to compose a shot.
not sure if this helps, but once i did realize my error of not resetting the camera for what i was trying to do, the problem was gone.
Both of these sound like a good analysis of what may ahve caused your issues. I have a nifty 50 which I got recently but have only had it out once so far and did not notice any issues. But I was not doing potrait like fotos either. good luck.
Did you lock focus on the eyes and then recompose? Is it possible that you re-focused after you recomposed?
i had a similar problem with my nikon 50mm, inconsistent focus and hunting for focus, even after i locked it. Problem was, I thought i locked it, but i didn't check the settings on the camera iteself. I was set up for continuous focus instead of single focus, which accounted for the lens hunting and refocusing everytime i tried to compose a shot.
not sure if this helps, but once i did realize my error of not resetting the camera for what i was trying to do, the problem was gone.
Both of these sound like a good analysis of what may ahve caused your issues. I have a nifty 50 which I got recently but have only had it out once so far and did not notice any issues. But I was not doing potrait like fotos either. good luck.
KittenKrusher
Sep 27, 12:21 PM
At my Uni we aren't suppose to have out own wireless networks, but I know of atleast 4 dorms that do. They simply hide the network so only they know what it is.
ugru
Apr 16, 06:59 AM
That means the ACD would act as a hub
Are you sure about that?
AFAIK in a TB daisy chain the monitor must be the last....
EDIT: i was wrong.
Existing monitors with MDP will work in a TB daisy chain if used as the last peripheral. New monitors that will probably have TB ports can be used also in the middle of a chain or as a HUB....
Are you sure about that?
AFAIK in a TB daisy chain the monitor must be the last....
EDIT: i was wrong.
Existing monitors with MDP will work in a TB daisy chain if used as the last peripheral. New monitors that will probably have TB ports can be used also in the middle of a chain or as a HUB....
jimbo1mcm
May 5, 10:01 AM
I removed my Samsung 470 SSD from an HP laptop that had Win 7 running. Trim was enabled automatically with Win 7. When I put it into my new Macbook Pro trim was not enabled. You can check by going into the Apple, then About, then More Info and finally into Serial ATA. When you scroll down you will see that trim is not enabled.( Without it, the SSD will fill up and slow down. Google it and see what it does). Groths.org had a Trim Enabler patch that worked perfectly. I downloaded it and clicked on it and it installed. When I went back into the Apple, etc I found that trim had been enabled. Kudos to Oskar. I dropped a couple of bucks on him from Paypal because I appreciate this kind of work. Maybe Apple will have trim enabled in the next OS, like Win7.
No comments:
Post a Comment